Product ID:AMMONIUM MOLYBDATE, 12215
MSDS Date:01/27/1989
FSC:6810
NIIN:00N057008
MSDS Number: BWNYM

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 508-521-6300

Cage: 0JVJ1

Telephone: 978-521-6300

Cage: 0JVJ1

AMMONIUM MOLYBDATE

CAS: 27546-07-2

Fraction By Weight: 100%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION: MAY BE HARMFUL;
EFFECTS NOT KNOWN. SKIN/EYES/INHALATION: MAY CAUSE IRRITATION.
CHRONIC: INGESTION: LARGE DOSES OF A SIMILAR COMPOUND HAS PRODUCED
KIDNEY DAMAGE IN EXPERIMENTAL ANIMAL S. SKIN/EYES/INHALATION: NONE
KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) . INGEST: OBTAIN MEDICAL ATTENTION.
SKIN: REMOVE CONTAMINATED CLOTHING, FLOOD SKIN WITH LARGE AMOUNTS
OF WATER. IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION. EYES:
IMMEDIATELY FLUSH EYES, INCLUDING UNDER EYELIDS, WITH LARGE AMOUNTS
OF WATER FOR AT LEAST 15 MINUTES. CALL MD.

Extinguishing Media:USE WATER, CARBON DIOXIDE, DRY CHEMICAL
EXTINGUISHING AGENTS, DRY SAND OR DRY GROUND DOLOMITE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . IF WITHOUT RISK, REMOVE MATERIAL FROM FIRE AREA. COOL
CONTAINER W/WATER FROM MAXIMUM DISTANCE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WEARING FULL PROTECTIVE EQUIPMENT, COVER SPILL
WITH DRY SAND OR VERMICULITE. MIX WELL AND CAREFULLY TRANSFER TO A
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN A COOL, DRY, WELL-VENTILATED AREA.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED HIGH EFFICIENCY PARTICLE
RESPIRATOR.
Ventilation:LABORATORY FUME HOOD.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED SAFETY GOGGLES.
Other Protective Equipment:LAB COAT & APRON, FLAME & CHEMICAL RESISTANT
COVERALLS, EYEWASH CAPABLE OF SUSTAINED FLUSHING, SAFETY DRENCH
(SUPDAT)
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health
OTHER PROT EQUIP: SHOWER & HYGIENIC FACILITIES FOR WASHING.

HCC:N1
Vapor Pres:0
Evaporation Rate & Reference:0 (BUTYL ACETATE=1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE POWDER; ODOR NOT KNOWN.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
ALKALI METALS, ACIDS.
Stability Condition to Avoid:THERMAL DECOMPOSITION.
Hazardous Decomposition Products:MOLYBDENUM OXIDES.

Waste Disposal Methods:CONSULT STATE, LOCAL OR FEDERAL EPA REGULATIONS
FOR PROPER DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.